2019
2020

Mechanical Engineering MEng (Hons) 2019

This course is currently available through Clearing

Online applications only

 

 

  • Entry Requirements:
    Online applications only. A Level: BCC (including B Maths and C Physics). Alternatives to A-level Physics include: Further Maths, Design Technology, Chemistry, Engineering Science, Biology and Electronics | BTEC * | GCSE C/4 in English and C/4 Maths

Course overview

Entry requirements

  • A levels (2019 entry)
    ABB – BBB to include Maths and a physical science or technology subject (e.g. Physics, Electronics, Design Technology)
  • BTEC
    Extended Diploma and National Extended Diploma: DDM. Subject specific requirements - for more, please see below.
  • International Baccalaureate
    31 overall points with 5, 5, 5 in higher level subjects including Maths and Physics at higher level grade 5.
  • Further requirments
    GCSE English Grade C/4 or above and Maths Grade C/4 or above
More information

Key Dates

  • Start date
    September
  • Open Days
    Our next Open Day is taking place on:
    Saturday 5th October

Aston Engineering & Technology graduates go on to earn £1,900 more than the sector average, one year after graduation (LEO, 2018)

Opportunity to undertake a placement year

Ranked top 30 in the UK for Mechanical Engineering (Guardian League Table 2019)

Accredited by the Institution of Mechanical Engineers (IMechE)

Course summary

Recent graduates from this course found graduate engineer and consultancy positions with companies such as BAE Systems, Army/Royal Air Force, Nissan, Jaguar, and EDF Energy.  

Entry requirements and fees for 2019

Entry requirements

4 years full-time / 5 years part-time with integrated placement year

UCAS Code: H301

Please note:

GCSE requirement: English Grade C/4 and Maths Grade C/4

All candidates are considered on an individual basis and the whole application is reviewed which includes previous and predicted qualifications, any experience, references and motivation.

Whilst the grades listed here are our entry requirements, we understand that predicted grades are only an estimate. We will therefore consider applicants with predicted grades of BBB if the application is of a high standard which includes a strong personal statement and academic reference. However, any offer made will not be lower than stated below.

Fees:

£9,250 (£4,625 during placement year) for UK/EU students (2019/20)                             
£19,000 for Outside EU students (2019/20)
Placement Year: £4,625 for International Students

More on fees 

Applicants receiving offers are invited to an applicant visit day.

More on Admissions Policy

Applicants whose first language is not English will be required to provide evidence of an English language qualification. Find out more about our English language requirements. For more information about qualifications view our Aston in your country webpage.

Typical offers:

A levels

ABB-BBB to include Maths and a physical science or technology subject (e.g. Physics, Electronics, Computer Science).

BTEC

Extended Diploma and National Extended Diploma (Science/Technical/Engineering types): DDM including the following units and at Distinction: Mathematics for Engineering Technicians,
Further Mathematics for Engineering Technicians, Mechanical/Electrical Principles,
Further Mechanical/Electrical Principles.

National Diploma and Diploma (Science/Technical/Engineering types): DD including the following units and at Distinction: Mathematics for Engineering Technicians,
Further Mathematics for Engineering Technicians, Mechanical/Electrical Principles,
Further Mechanical/Electrical Principles,
plus 1 A-level at minimum Grade B.

Foundation or 90 credits Diploma (any subject): DD plus 2 A-levels at minimum grade B including Maths and a physical science or technology subject.

National Extended Certificate or Subsidiary Diploma (any subject): D plus 2 A-level Maths and a physical science or technology subject Grade B.

Certificate/ National Certificate Level 3: Not accepted

International Baccalaureate

31 overall points with 5, 5, 5 in higher level subjects including Maths and Physics at higher level grade 5.

Access to Higher Education

Subject related Access with at least 30 Distinctions and 15 Merits at level 3 including only Distinctions in Mathematics and Physics

Non-standard qualifications

Degree: 

Year 1 entry: We may consider applicants for year 1 entry who are undertaking a 1st year degree elsewhere. You must meet the GCSEs and A level (or equivalent) requirements as listed. In order to be considered you will need to submit a UCAS application as we do not accept direct applications and this must include an academic reference.

Year 2 entry: Please note that second year transfers are not part of the standard admissions process and is up to the discretion of the admissions team and tutor. Applications are only considered if there is space on that year of the programme. Typically, applicants for second year entry must meet the GCSEs and A level (or equivalent) requirements as listed. Alongside this you must have gained (or be expected to gain) 65% overall and 120 credits  on an equivalent programme at another recognised university. The equivalency of the programme is reviewed by the Admissions Tutor and you will be required to provide an official copy of the programme specification of this. In order to be considered you will need to submit a UCAS application as we do not accept direct applications and this must include an academic reference.

Year 3: We will not be able to consider any application for Year 3 

 

The information contained on this website details the typical entry requirements for this course for the most commonly offered qualifications. Applicants with alternative qualifications may wish to enquire with the relevant admissions teams prior to application whether or not their qualifications are deemed acceptable. For less commonly encountered qualifications this will be judged on a case-by-case basis in consultation with the academic admissions tutor.

Course outline

Course outline

Mechanical Engineering Design

We believe our students should be supported as you develop into inquisitive and enthusiastic problem solvers. Using a range of underpinning knowledge and technical skills, you will be able to tackle problems faced by industry today and into the future.

Our programmes introduce a full range of core engineering science modules coupled to practical projects, ensuring a highly integrated and industry-relevant degree programme.

The MEng degree takes the BEng and develops it to a full Masters level programme, which fully meets all the academic requirements for Chartered Engineer status.

From your first year you'll be working on major projects, often in partnership with commercial engineering companies. You will work with colleagues, staff and engineers from industry to develop real solutions to live problems.

Subject guide and modules

Our degree programmes are driven by the demands of industry to produce graduates with extremely strong engineering and scientific skills. Our graduates also have strong project management and team work skills, and commercial awareness.

Our BEng degrees are either 3-years full-time, or 4-years if you choose a sandwich programme incorporating a year of professional experience. Your first year will encompass the fundamental disciplines of mechanical engineering, through academic classes in engineering science and mathematics. You will also have large integrated projects in practical settings, and we will help you to understand new technology and concepts. The course will also reflect industry practice, as you will work in groups to take products from initial concepts to built and tested prototypes.

Your second year follows on with a similar structure of academic classes coupled to major group projects. However, the focus shifts from developing your basic skills to preparing you to become a professional engineer. You can then enter your placement or final year well equipped to meet what will be demanded of you. Your third year features a major project, involving design, experimental or analytical work which can be tailored to suit your own interests

Your final year will provide you with a mix of in depth technical modules integrated with further professional skills. In this year you will also work on a substantial group project.

The flexible structure of our degrees enables transfer between Mechanical and Design Engineering programmes after first year. However, only the Mechanical Engineering programme runs to MEng (masters) level. You can also transfer between full-time and placement programmes up to the end of your second year. 

The broad basis of our programme, together with the possibilities for specialisation, will make you attractive to employers from a spectrum of industries.

Year 1

Modules

  • Design and Experimentation 
  • Prototyping and Development 
  • Electronic Engineering Foundations 
  • Engineering Science
  • Engineering Mathematics 1

Year 2

Modules

  • Engineering Mathematics 2 
  • Thermodynamics and Fluid Mechanics
  • Quality Engineering 
  • Engineering Materials 1 
  • Solid Mechanics 
  • Dynamics and Control Systems 
  • Design and Engineering for the User 
  • Engineering for Industry 

Year 3

Modules

  • Advanced Thermodynamics and Fluids
  • Heat Transfer and Turbo-Machinery 
  • Energy Efficiency 
  • Design Failure Analysis 
  • Final Year Project 
  • Advanced Dynamics and Control Systems 
  • Advanced Systems Design 
  • Solid Mechanics and Finate Element Analysis 
  • Engineering Design and the Environment

Year P - Optional placement year

See placement year section or find out more about the Aston placement year.

  • EAS (Engineering and Applied Science) Study Placement Year 
  • EAS Industrial Placement Year
  • EAS Study/Work Placement Year 

Year 4

Modules

Core modules:

  • Project Management 
  • Computational Fluid Dynamics and Applications 
  • Practical Numerical Methods 
  • MEng Group Project 
  • Product Introduction Processes

You will also be able to select one of the following options:

  • Sustainable Energy
  • CAD Principles and Materials Selection
Learning teaching and assessment

You will benefit from a wide range of teaching methods and learning styles, including:

  • Hands-on practical project classes
  • Lectures, tutorials and seminars
  • Video and computer-aided learning
  • Lab classes and project work
  • A strong personal tutor system


Assessment is by a combination of exams, continuous assessment and projects. Students are also able to take part in major projects such as the Formula Student Racing Car Project, at which Aston teams have enjoyed a strong track record.

Placement year

Our current and recent placement employers include companies in the UK and abroad such as: BNFL, ConocoPhillips, GSK, Kraft, Alfa Laval, Thames Water, AMEC and 3M.

Find out more about placement years at Aston.

Professional accreditation

The MEng in Mechanical Engineering is accredited by the Institution of Mechanical Engineers (IMechE) for the purpose of meeting the educational requirements of Chartered Engineer (CEng). 

Career prospects

Our close links with industry and the broad basis of our degree programme ensures our students have excellent career opportunities upon graduating. You might want to go into careers in:

  • research, development and design
  • automotive engineering
  • manufacturing systems engineering
  • power generation
  • advanced technology and computer-aided design
  • accountancy, management, marketing
  • Navy, Army and RAF Officer training


Our graduates work for automotive, aerospace and electronics companies, pharmaceutical and chemical organisations and computer software houses. Our recent graduates found graduate engineer, and consultancy positions with companies including Corus, IMI Plc, Army/Royal Air Force, Yamazaki Mazak, Carillion, BOC, NTL, BAE Systems, Nissan, Lloyds TSB, Phillips, Jaguar, TRW and EDF Energy. 

Facilities and equipment

You will have access to state-of-the-art computing facilities, including CAD labs, numerically controlled machine tools, document production, research and self-tuition. You will develop your programming skills and use computers to solve engineering problems and to simulate and analyse engineering systems. 

The School of Engineering and Applied Science has invested heavily in the creation of state of-the-art computer laboratories. Our Mechanical Engineering and Product Design students have their own access to specific computer facilities for design.

Contact us

EAS Undergraduate Admissions Office
+44 (0)121 204 3400
ugadmissions@aston.ac.uk

What's it like to study at Aston?

Aston appealed to me because of its links with industry and focus on valuable industrial placements. I was lucky to secure a placement with GSK.

Aaron Lowe

Register your interest